Dishwasher parts prices in Nairobi vary according to the appliance brand, model, part quality, availability and whether the component is new, refurbished or imported. Common replacement parts such as door seals, filters and inlet valves are relatively affordable, while control boards, circulation pumps and complete motor assemblies can cost significantly more.
The prices below are estimated Nairobi market ranges in Kenyan shillings. They are intended as a practical guide rather than a fixed quotation because suppliers and repair technicians may charge different amounts.
Common dishwasher parts and prices
| Dishwasher part | Estimated price in Nairobi |
|---|---|
| Dishwasher filter | KSh 800–1,500 |
| Door seal or gasket | KSh 1,000–4,500 |
| Door latch assembly | KSh 1,500–5,000 |
| Spray arm | KSh 1,200–7,000 |
| Water inlet valve | KSh 1,000–6,000 |
| Drain pump | KSh 2,500–12,000 |
| Circulation pump | KSh 3,500–12,000 |
| Heating element | KSh 2,000–10,000 |
| Thermostat | KSh 2,000–4,000 |
| Temperature sensor | KSh 1,800–3,200 |
| Float assembly | KSh 1,500–3,000 |
| Detergent dispenser | KSh 1,000–6,000 |
| Dishwasher motor | KSh 5,000–15,000 |
| Water pump assembly | KSh 7,000–12,000 |
| Timer or programmer | KSh 5,000–9,000 |
| Control panel | KSh 5,000–10,000 |
| Main control board or PCB | KSh 10,000–20,000 |
| Cutlery basket | KSh 2,000–7,000 |
| Dish rack | KSh 4,000–12,000 |
| Door hinge | KSh 2,000–5,000 |
| Rack wheel or roller | KSh 500–2,000 |
| Drain hose | KSh 1,000–3,000 |
| Water supply hose | KSh 1,000–3,000 |
| Hose clamp | KSh 200–800 |
| Wiring harness | KSh 2,000–6,000 |
| Door handle | KSh 1,500–5,000 |
These prices are general estimates. Brand-specific assemblies, imported components and genuine manufacturer parts may cost more than the amounts shown in the table.
Door seals, latches and hinges
Door-related parts are among the most frequently replaced dishwasher components. A worn gasket may cause water to leak from the front of the machine, while a damaged latch can prevent the dishwasher from starting because the safety switch does not detect a properly closed door.
A standard door seal may cost between KSh 1,000 and KSh 4,500. The lower end usually applies to commonly available or compatible seals, while genuine seals for Bosch, Siemens, Miele, Whirlpool, Samsung and other imported brands may cost more.
Door latches generally cost KSh 1,500–5,000. A complete latch assembly with a microswitch is more expensive than a basic mechanical catch. Hinges, handles and associated springs may also need replacement if the door drops suddenly, fails to close evenly or feels unusually loose.
Before buying a seal, provide the supplier with the full dishwasher model number. Dishwasher gaskets can look similar but differ in length, profile, mounting design and corner shape.
Pumps, valves and hoses
Drain pumps remove used water from the dishwasher at the end of a wash cycle. A faulty pump may cause standing water, unusual humming or repeated drainage errors. Prices range from approximately KSh 2,500 for some basic or compatible units to KSh 12,000 for higher-priced or brand-specific replacements.
Circulation pumps push water through the spray arms during the washing cycle. Since they perform a more demanding function, they are usually more expensive than drain pumps. Some circulation pump replacements cost KSh 3,500–8,000, while integrated pump-and-motor assemblies can reach KSh 12,000 or more.
Water inlet valves control the supply of fresh water into the dishwasher. They commonly cost KSh 1,000–6,000, depending on the brand and connection type. A defective valve may cause slow filling, overfilling or a dishwasher that does not fill at all.
Drain hoses and inlet hoses are usually cheaper than pumps and valves. However, the correct hose length, diameter, connector and anti-leak design must be confirmed before purchase.
Heating and temperature-control parts
Heating elements warm the water and help dry dishes after washing. When the element fails, the dishwasher may clean poorly, leave dishes wet or display a heating-related error code. Estimated prices range from KSh 2,000 to KSh 10,000.
Some dishwashers use a separate exposed heating element, while others use an integrated heater inside the circulation pump or water-heating assembly. The integrated design may increase the replacement cost because the technician has to replace a larger assembly rather than a single element.
Thermostats and temperature sensors are smaller components but are important for safe heating control. A thermostat may cost approximately KSh 2,000–4,000, while a temperature sensor may cost about KSh 1,800–3,200.
Testing should be done before replacement because heating faults can also result from blocked filters, wiring problems, relay failure or a defective control board.
Control boards and electronic components
The main control board, also called a PCB or electronic module, controls wash programmes, water intake, heating, drainage and safety functions. It is one of the most expensive dishwasher parts in Nairobi. Replacement boards commonly cost between KSh 10,000 and KSh 20,000, although some boards may be repaired instead of replaced.
A control panel, display module or user-interface board may cost about KSh 5,000–10,000. The final price depends on whether the part is sold separately or as part of the complete front-panel assembly.
Electronic parts should not be ordered solely from a fault code. The same error may be caused by a blocked hose, failed sensor, wiring fault or defective valve. A technician should inspect the appliance and test the relevant circuits before recommending a PCB replacement.
Racks, spray arms and internal accessories
Dishwasher racks, cutlery baskets, spray arms and rack wheels affect the appliance’s cleaning performance and usability. A cracked spray arm may distribute water unevenly, leaving food residue on dishes. A damaged rack can expose dishes to the spray mechanism or allow the metal coating to deteriorate.
Spray arms may cost KSh 1,200–7,000, depending on whether the part is an upper, middle or lower arm and whether it is genuine or compatible. Cutlery baskets are commonly priced around KSh 2,000–7,000, while complete dish racks can cost approximately KSh 4,000–12,000.
Rack wheels and rollers are among the least expensive dishwasher components. A set may cost about KSh 500–2,000. Replacing worn rollers can restore smooth rack movement without replacing the entire basket.
What affects dishwasher parts prices?
Several factors influence the final cost of a dishwasher spare part in Nairobi:
-
Brand and model compatibility.
-
Genuine, compatible, refurbished or used-part status.
-
Imported versus locally available stock.
-
Shipping, customs and supplier margins.
-
Whether the part is sold individually or as a complete assembly.
-
Availability of the part in Nairobi.
-
Warranty offered by the supplier.
-
Installation difficulty and technician charges.
Bosch, Siemens, Miele, Whirlpool, Samsung, LG, Electrolux, Beko, Hotpoint, Indesit and Candy dishwashers may use different parts across their model ranges. Therefore, buyers should confirm availability and compatibility before making a purchase.
Where to buy dishwasher parts in Nairobi
Dishwasher parts are available from appliance spare-parts dealers, authorised brand service centres, independent repair workshops and online marketplaces. Nairobi’s central business district has several appliance and electrical-parts dealers, while specialised repair companies may source parts on request.
Online retailers can be useful for comparing prices, but buyers should verify the seller’s return policy, delivery charges and model compatibility. The safest option for expensive parts is usually an authorised service centre or an established appliance technician.
Genuine parts may cost more initially but are more likely to fit correctly and provide reliable operation. Compatible parts can be suitable for some appliances, but their quality and expected lifespan may vary.
Installation and repair charges
The table prices generally refer to parts only. Labour, transport, diagnosis and installation are normally billed separately. A dishwasher diagnosis visit in Nairobi may cost approximately KSh 500–1,500, while a complete repair or overhaul can be considerably higher depending on the fault and parts required.
Before approving a repair, request a breakdown showing the diagnosis fee, part price, labour charge, transport cost and warranty. If the estimated repair approaches the value of an old dishwasher, compare the cost with replacing the appliance.
How to avoid buying the wrong part
Record the dishwasher’s brand, model number and serial number before contacting a supplier. The model label is commonly found on the inside edge of the door, along the door frame or on the rear panel.
Take clear photographs of the faulty part, its connectors and mounting points. For pumps, valves and heating elements, confirm the voltage, wattage, connector arrangement and physical dimensions.
Avoid relying only on the dishwasher’s brand because one brand can use several different components across its product ranges. For expensive electronic boards and pump assemblies, ask whether the replacement is new, refurbished or compatible. Also confirm the return conditions before payment.
Dishwasher parts prices in Nairobi range from a few hundred shillings for rack rollers and clamps to more than KSh 20,000 for certain electronic control boards and complete assemblies. The most cost-effective repair begins with accurate diagnosis and correct model identification.
Replacing a filter, gasket, spray arm or hose is usually less expensive than replacing a PCB, circulation pump or motor assembly. Use the price table as a budgeting guide, then obtain a model-specific quotation from a reputable Nairobi supplier or qualified appliance repair technician.